Power core
Lithium battery, inverter, busbars, and fusing pre-wired on a mounting board. Land it in the van, connect four leads, done.
12VPre-wired
Modules
Modules for DIY builders.
Power, lighting, a nap station, and a coffee bar — pre-built modules you install yourself. No plumbing, no full kitchen, no RV.
The modules
Electrical modules come pre-wired, tested, and labeled. Woodwork is birch plywood on powder-coated steel, cut to your van's dimensions and mounted to factory points where possible.
Solar & charging
Roof panel, MPPT controller, and DC-DC charging off the alternator with a monitor you can read at a glance.
SolarAlternator
Cabin electrics
Switch panel, dimmable LED lighting, USB-C and 120V outlets, roof fan wiring, and labeled harnesses cut to length.
LightingOutlets
Nap station
A low platform for a real rest between drives — not a bedroom. Cushion, headrest, and a gear bay underneath.
RestStorage
Coffee & drink bar
A compact bar top instead of a kitchen: fridge slot, kettle or espresso outlet, mug storage, and an optional water jug with a hand pump. No plumbing.
CoffeeOptional water
Insulation & panels
Wall, ceiling, and floor insulation with pre-cut panels so the cabin stays quiet and holds temperature.
ComfortQuiet
01
Tell us your van
Make, wheelbase, and roof height. Panels and harnesses are cut and labeled for that exact van.
02
Pick your modules
Each one stands alone. Take just the power core, or the whole set — nothing depends on anything else.
03
Build it yourself
Modules arrive pre-assembled with wiring diagrams and hardware. Hand tools and a weekend, not a shop.
Building it yourself?
Tell us which van you're starting from and which modules you want, and we'll spec the wiring and panels for it.